POLYMER EXAMPLES MECHANICAL EXAMINATION AFTER ALKALINE SOLUTIONS PROCESSING
DOI:
https://doi.org/10.31435/rsglobal_ws/28022022/7783Keywords:
Polymer examples examination in alkaline environment after processing content tension was connected to deformation dependent. At the same time tension was rising up 10 mPa. Then was defined tension while was happening examples’ of quick disintegration.Abstract
Polymer examples examination in alkaline environment after processing content tension was connected to deformation dependent. At the same time tension was rising up 10 mPa. Then was defined tension while was happening examples’ of quick disintegration.
References
Берштеин В.А. Дефеектность поверхностного слоя и прочность ориентированного полимера. Высокомолек. соед., 1978. Т.А. 20. Б 3. с. 579.
Моисеев Ю.В., Заиков Г.Е. Химическая стойкость полимеров в агрессивных средах. «Химия». М., 1979, с. 288.
Берштейн В.А., Егорова Л.М., Соловьев В.В. О разрушении полимеров по гидролитическому мехонизму, Высокомолек. Соед., 1977, Б. 5, с. 854-860.
Downloads
Published
Issue
Section
License
All articles are published in open-access and licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0). Hence, authors retain copyright to the content of the articles.
CC BY 4.0 License allows content to be copied, adapted, displayed, distributed, re-published or otherwise re-used for any purpose including for adaptation and commercial use provided the content is attributed.
How to Cite
